Airport Systems

SECTION 7. APPENDIX A – EXAMPLES

7.1Light Configuration Examples

The HMS Light Configuration Menu provides the flexibility and configurability to address most field installations. This section provides specific examples that demonstrate some possible configuration values that are the results of choices made in the Light Configuration Menu. The PLCHMR system has eight (8) relays that can report the status of up to 24 Flash Heads. The Light Configuration menu enables the user to map the status reporting from any combination of Flash Heads to any one or all 8 of the relays. In section 3.4 it was declared that the relay’s state is controlled by the software configured Tier Reporting Mechanism (TRM). Section 3.4 also indicated the TRM has two states FLASH/OK and FAIL/FAULT. Software configuration of the TRM is performed through the HMS Light Configuration Menu. Each TRM can be assigned from zero to 24 Flash Heads. A Flash Head is assigned to a specific TRM via a numeric entry in its corresponding Tier_Lvl column in the Light Configuration Menu. For a TRM to activate its relay the status reported of all Flash Heads assigned to that tier must be FLASH/OK. The TRM will deactivate its relay if any Flash Head assigned to it reports a FAIL/FAULT status.

For instance consider the following example on how a system with 24 Flash Heads could be configured:

In the following example consider a system with nine Flash Heads arrange on 3 physical tiers as shown in Figure 7.1-1.

A typical configuration could use seven Tier Reporting Mechanisms TRMs. Each of the top six Flash Heads could be assigned to its own individual TRM. The three lowest Flash Heads would be assigned to one of the remaining TRMs. The Flash/Fail status for the top six Flash Head would be collected by their assigned TRM and then reported by a relay whose number identifies the tier or (TRM) number. This would result in the top six Flash Heads having individualized status reports and the bottom three flash Heads having a collective status report. The Light Configuration Menu setting would appear as shown in Figure 7.1-2. An alternative view is presented in Figure 7.1-3 which shows the individual groups Flash Head groups reporting status to their assigned TRM which is connected to the reporting relay.

PLC Health Monitoring & Reporting Sys

7-1

Manual EPM40002083-001 Rev -

Page 45 Page 47
Page 46
Image 46
Honeywell 40002083 installation and operation guide Appendix a Examples, Light Configuration Examples
Page 45 Page 47

40002083 specifications

The Honeywell 40002083 is an advanced control system designed for industrial applications, primarily focusing on process control and automation. This device is a part of Honeywell's integrated portfolio that caters to various industries, including oil and gas, pharmaceuticals, and manufacturing. The 40002083 serves as a vital tool for optimizing operational efficiency and ensuring safety across multiple processes.

One of the standout features of the Honeywell 40002083 is its robust architecture, which supports a diverse range of input and output configurations. This flexibility allows the device to integrate seamlessly with existing systems, accommodating both legacy and modern equipment. The system supports various protocols and communication standards, ensuring connectivity with other devices and platforms. Additionally, it offers user-friendly interfaces for easier monitoring and control.

The Honeywell 40002083 is equipped with cutting-edge technologies to enhance its performance. One such technology is its advanced data analytics capability, which provides real-time insights into operational parameters. This feature empowers users to make informed decisions based on accurate data, ultimately improving productivity and reducing downtime. Furthermore, the device utilizes machine learning algorithms to optimize system performance over time by adapting to changing process conditions.

Another significant characteristic of the Honeywell 40002083 is its emphasis on safety and compliance. The device includes comprehensive safety features, ensuring that critical processes remain within safe operating limits. It also helps meet industry standards and regulations, making it a reliable choice for enterprises striving for compliance. The built-in redundancy mechanisms further enhance system reliability, reducing the risk of failures or unplanned outages.

Moreover, the Honeywell 40002083 supports extensive scalability, making it suitable for both small and large-scale operations. Whether an organization is expanding its facilities or upgrading its control systems, this device can easily accommodate new requirements without necessitating a complete overhaul.

In summary, the Honeywell 40002083 embodies a blend of flexibility, performance, and safety, making it a valuable addition to any industrial automation landscape. With its advanced features, cutting-edge technologies, and strong emphasis on reliability, it stands as a testament to Honeywell's commitment to providing innovative solutions for modern industrial challenges. This control system enables businesses to enhance operational efficiency, maintain compliance, and ensure a safer working environment.
Top Page Image Contents