Xerox C90, C75, C65 manual Loading Paper in Trays 1, Loading paper in Tray 5, the Bypass Tray

Loading paper

Insert the paper for Tray 5

Extension bar

5

6

0 800086C-LKS

Insert paper for Tray 6.

NOTE

Loading Paper in Trays 1 - 4

1.Pull out the paper tray.

2.Load the paper neatly in the tray. Do not load paper above the maximum fill line mark on the edge guide.

3.Ensure that the edge guides are against the top, bottom, and side edges of the paper.

4.Push in the paper tray.

A pop-up screen may appear on the screen asking you to confirm the paper stock settings or to load the required paper for the tray. Confirm or change the paper and size descriptions as required.

Loading paper in Tray 5, the Bypass Tray

Use Tray 5 to load special or odd-size stock. Insert paper as shown. Do not load paper above the maximum fill line. Pull out the extension bar to accommodate paper that is longer than the tray. Confirm or change the paper and size descriptions as required.

Loading Paper in Tray 6, the High Capacity Feeder

To load paper, open the cover and wait for the tray to lower. When the paper has been loaded, close the cover to raise the tray. Tray 6 can only handle 8.5 x 11 inch or A4 size paper.

Use the labels for instruction on how to orient special stock such as transparencies, labels, or hole-punched stock.

Page 36 Xerox WorkCentre Pro/CopyCentre User Guide