Troubleshooting

Your washing machine could fail to work. Before contacting the Technical Assistance Centre

(see “Assistance”), make sure that the problem cannot be not solved easily using the following list.

GB

 

Problem

The machine does not switch o n .

The wash cycle does not start .

The machine does not fill with water or the indicator light for the first wash cycle stage flashes rapidly.

The machine continuously fills with water and continually drains away or Water left in the dru or Stuck on wash.

The machine does not drain or spin .

The machine does not heat or poor wash results.

The programme takes too long.

The machine vibrates a lot during the spin cycle.

Possible causes/Solution:

•The appliance is not plugged into the socket fully, or not enough to make contact.

•There is no power to the socket, or the fuse has blown in the mains plug.

•The door is not closed properly.

•The 'ON/OFF' button has not been pressed.

•The 'START/PAUSE' button has not been pressed.

•The water tap has not been turned on to allow water to flow into the machine.

•A delayed start has been set.

•The water inlet hose is kinked.

•The water inlet hose is not connected to the water supply.

•The water pressure is too low.

•The water tap has not been turned on to allow water to flow into the machine.

•There is no water supply to the house.

•The inlet valve filter is blocked.

•The 'START/PAUSE' button has not been pressed.

•The top of the drain hose is too low - It must be fitted at a height between 65 and 100 cm from the floor.

•The drain hose is connected incorrectly to the sink trap allowing water to run into the machine, the drain hose must be positioned higher than the bottom of the sink to prevent water flowing down the drain hose.

•The end of the drain hose has been pushed too far down the

standpipe, the 'U' bracket should be fitted 100 mm from the end of the drain hose.

•The Pump filter is blocked.

•The drain hose is kinked.

•New Installation - The blanking cap or spigot has not been removed if connected under a sink.

•The drain hose or sink trap is blocked.

•The wash cycle does not include draining, some wash cycles require the drain phase to be started manually.

•The REDUCED CREASES function button has been activated. To complete the wash cycle, press the START/PAUSE button.

•The 'Spin Speed' selector knob is in the position.

•The 'Temperature' selector knob is in the position.

•Programme times will vary due to water pressure, the incoming water temperature and if the wash load goes out of balance. This will increase the programme times accordingly (see ' The machine wont spin properly' below).

•The feet have not been adjusted, enabling the machine to rock.

•New Installation - Either the Transit Bolts including the plastic spacers, or the Polystyrene Packaging have not been removed when installing the machine.

•The machine is trapped between cabinets and/or walls.

•The load is in a slight out of balance condition and machine is spinning, but at a lower speed.

￿#

Page 14 Page 16
Page 15
Image 15
Xerox BHWM 129 manual Troubleshooting, Problem, Possible causes/Solution
Page 14 Page 16

BHWM 129 specifications

The Xerox BHWM 129 is a compact, multifunctional black-and-white printer designed to meet the needs of small to medium-sized businesses. Combining efficiency, reliability, and advanced features, the BHWM 129 stands out in today’s competitive market for office equipment.

One of the main features of the BHWM 129 is its exceptional printing speed. With the ability to produce up to 29 pages per minute (ppm), it ensures that users can handle high-volume print jobs without significant delays. This speed is complemented by a first-page-out time of just 6.5 seconds, allowing users to get their documents quickly and efficiently.

The BHWM 129 utilizes advanced laser printing technology, providing high-quality text and graphics. It boasts a print resolution of up to 1200 x 1200 dpi, ensuring sharp and clear documents that are suitable for professional presentations. The printer also supports a variety of media sizes and types, including envelopes, labels, and cardstock, making it versatile for different office needs.

In addition to its impressive printing capabilities, the BHWM 129 offers comprehensive multifunction features. It combines printing, scanning, copying, and faxing functions into one compact device, saving valuable office space and resources. The flatbed scanner allows for scanning and copying of various document sizes, while the automatic document feeder (ADF) enhances productivity by accommodating multiple pages for quick duplication or faxing.

Another characteristic of the BHWM 129 is its user-friendly interface. The intuitive control panel with a digital display enables easy navigation through the printer’s functions. Moreover, it features connectivity options, including USB and network capabilities, allowing users to integrate the printer seamlessly into their existing office network. With wireless connectivity, users can print directly from their mobile devices, enhancing convenience and flexibility.

The Xerox BHWM 129 also prioritizes sustainability. It is designed with energy-efficient features, including low power consumption during idle times and the use of recyclable materials in its design. This commitment to environmental responsibility makes it an appealing choice for companies looking to reduce their ecological footprint while enjoying high-quality printing solutions.

Overall, the Xerox BHWM 129 represents an ideal choice for businesses seeking an efficient, multifunctional printing solution. With its combination of speed, quality, and advanced features, it is well-equipped to handle the diverse printing and documentation needs of today's dynamic work environments.
Top Page Image Contents