Xerox t 180 manual Steps to perform an offline update sysgen using, Auto command, Operating System

SYSGEN AND SYSGEN-RELATED PROCEDURES

Steps to perform an offline update sysgen using the AUTO command

	The following table lists the steps used to perform an offline update
	sysgen using the AUTO command.
	Table 4-3.Steps to perform an offline update sysgen using
		the AUTO command
Step	Action	System response
1.	Load the SST tape or cartridge tape on the
	selected peripheral device.
	Verify the existence of sufficient disk space,
	using the FCHECK command. Each disk
	must have a minimum of 3000 contiguous
	sectors free. If the number of available
	sectors is below 3000:
	• Back up as many files as necessary to
	obtain the minimum number of free
	sectors.
	• Delete the saved files from disk.
	• Compress the disk.
2.	Press the Boot button.	PC UI:
		The Boot menu window displays:
		Operating System
		System Disk
		Reel to Reel
		QIC
		18/36 Track Tape
3.	Select your choice of sysgen media with the	The command menu displays:
	mouse.
		COMMANDS	Display Commands
		BOOT	Boot the operating system
		SYSGEN	Build or update system files on
			disk from tape or host
		FORMAT	Format and initialize disk pack
		HOSTCOPY	Copy user files from host to
			disk
		AUTO	Auto Sysgen
		MINI	Configuration change only
		ERASE	Erase all files.
4.	Key in AUTO and press <ENTER>.	* Sysgen program running *
		System ID is: xxxxx
		Do you wish to continue auto sysgen:
		’y’ or ’n’

4-14 XEROX DOCUPRINT 180 LPS SYSTEM GENERATION GUIDE