Xerox t 180 manual Performing a mini sysgen, Mini sysgen procedure summary

SYSGEN AND SYSGEN-RELATED PROCEDURES

Performing a mini sysgen

Use the following procedure when performing a mini sysgen.

When to use You can use the MINI command to make changes to the logical configuration of the system, such as:

•

•

change the configuration options of the current system

deactivate or reactivate features and configuration options that were installed as part of a previous full or update sysgen.

Note: Make sure the logical configuration (the features specified in the configuration options) and the physical configuration (the hardware that supports those features) are the same before performing a sysgen.

If you perform a sysgen and some device in the physical configuration is missing from the logical configuration, that device may be unusable after the sysgen is performed.

Mini sysgen procedure summary

Table 4-6 lists the steps used to perform a mini sysgen.

Step 1. Review the configuration options provided in the “Configuration menu” section of the “Sysgen configuration options” chapter.

Step 2. Use the MINI command to display the Configuration Options menu.

Step 3. Select or specify your desired options.

XEROX DOCUPRINT 180 LPS SYSTEM GENERATION GUIDE 4-27