Xerox XM3-19w manual Method 2 Digital DVI Connection

Installation

Method 2: Digital (DVI) Connection

1Turn off the computer and unplug the power cord

2Connect the DVI signal cable (not included) to the DVI port on the back of the computer.

3Connect the audio cable to the line-in port on the back of the computer.

4Connect the power cord to the LCD monitor and wall outlet.

5Press the button, located on the bottom side of the main unit to turn the monitor on, then turn the computer on. If the monitor displays an image, the monitor is successfully installed. If no image is displayed, check all connections.

6When the DVI and VGA input ports are connected at the same time, press down the AUTO button after 3 seconds to switch between the VGA mode and DVI mode.

14 Xerox© LCD Monitor User’s Manual