Xerox XM3-19w manual Using the OSD Menu, English

OSD Menu

3 OSD Menu

Using the OSD Menu

To create the best picture, your XM3-19w has been preset at the factory with the Preset Mode Timing shown on page 24. The OSD (On Screen Display) Menu allows the user to adjust various settings and options by following the steps below.

1Press the MENU button to display the OSD. The OSD main menu provides an overview of the selection of controls available.

	auto adjust	<up>to select
picture	brightness
	contrast
advanced
	h position
audio
	v position
options
	phase
utilities
	clock
reset
	exit
exit

2Press the ▲ or ▼ button to highlight the desired icon. Then, press the MENU button to activate the highlighted icon.

3Press the ▲ or ▼ button to select the desired adjustment icon. Then, press the MENU button.

4Press the ▲ or ▼ button to change the value of the selected item.

5Select the exit icon to exit the OSD.

6Repeat steps 1 through 4 to make further adjustments. All changes are stored immediately.

ENGLISH

Xerox© LCD Monitor User’s Manual 17