To transfer a call from the base to the handset, press INTERCOM. The call is placed on hold, CHARGE/IN USE blinks, and Hold and Paging Hand- set appear on the base's display. When the person with the handset an- swers, press SPEAKER. The call is re- leased from hold and transferred to the handset and the display changes to Handset in Use. To bring the base back into the conversation for a three- way conference, press SPEAKER again.
OUT OF RANGE
If you have the handset out of the base's range while a call is in progress, noise increases. Return to the base’s range within 30 seconds, then you can resume your phone conversation.
If you keep the handset out of the base’s range for 30 seconds or more, the call is disconnected. However if you are in 3- way conference call, the speakerphone call remains connected.
USING A HEADSET
You can talk with handsfree conve- nience using an optional headset that has a
16
To connect the headset, open the rub- ber cover marked 
on the side of the handset, then insert the headset's plug into the jack.
Headset
Jack
Notes:
•Connecting a headset disconnects the handset's earpiece and micro- phone.
•8 or 9 on the handset also con- trols the connected headset's vol- ume, but maximum setting is not available on the headset.
•If you place the handset on the base to recharge it while the headset is connected, be sure the handset seats properly.
With a headset connected, you can make or answer calls as usual using the keys on the handset. You can also make or answer calls by pressing the SPEAK- ER button located on the base.
You can use a handset holder (available from your local RadioShack store) to hang the handset on your belt for great- er convenience.
When you finish using the headset, dis- connect it from the handset and close the rubber cover to protect the jack.
