Menu Options:
•Edit Memory nn — edit the record as described in Steps 5 through 8 of “Storing a Name and Number in Memory” on Page 17.
•Delete Memory nn — the display prompts you to confirm the deletion.
Move the cursor to Yes, then press SELECT or DEL/CH. The phone beeps, and Memory nn Deleted appears.
•Go Back — returns you to the list of memory numbers.
Entering a Pause
In some telephone systems, you must dial an access code (9, for example) and wait for a second dial tone before you can dial an outside number. You can store the access code with the phone number. However, you should also store a pause after the access code to allow the outside line time to connect.
To enter a
Reviewing Memory Numbers (Handset Only)
To review your memory numbers, press MEM. The list of memory location num- bers
number
To see the stored phone numbers, press 7. An arrow to the right of the number means it is longer than 14 digits. Press
7again to see the rest of the number.
Repeatedly press 6 to return to the name display.
To exit the memory number list, press MEM.
To see a stored name and phone num- ber at the same time, press SELECT when the cursor is by a memory location number. To exit this display, hold down DEL/CH until the display clears.
Dialing a Memory Number
To dial a number stored in handset's memory, lift the handset and press MEM. The list of memory location numbers ap- pears. Choose a memory location (01- 20) by pressing a number or by repeat- edly pressing 8 or 9, then press TALK.
You can also dial a memory number af- ter pressing TALK. Press MEM (the dis- play does not change but the phone is in memory recall mode) then enter a mem- ory location number.
To dial a number stored in the base's memory, press MEMORY. Location No. appears. Press a number key
play.
19
