5.Plug the adapter into a standard AC outlet.
6.Lift the base's antenna to a vertical position.
On a Wall Plate
1.Detach the stand from the base by pressing the latches on the stand.
Stand
2.Insert the two tabs at the top of the narrow end of the supplied bracket into the base's upper tab slots as shown, then press down on the bracket's latches and insert them into the lower slots.
Bracket |
3.Plug one end of the supplied short modular cord into the TEL LINE jack on the back of the base as in Step 1 of “On a Desk Top” on Page 6.
4.Insert the supplied AC adapter's barrel plug into the DC IN 9V jack as
in Step 3 of “On a Desk Top” on Page 7.
5.Route the adapter and modular cords through the grooves on the bracket.
Adapter
and
Modular
Cord
Grooves
6.Plug the modular cord's other end into the wall plate jack, then align the bracket's keyhole slots with the wall plate studs and slide the base downward to secure it.
7.Plug the adapter into a standard AC outlet.
8.Press and lift out the handset holder, flip it over as shown, then snap it back into place so it holds the handset.
9.Lift the base's antenna to a vertical position.
7
