If the dial tone stops, you have
4. Press SPEAKER to hang up.
TURNING THE BASE RINGER ON/OFF
To turn off the base's ringer, set RINGER on the back of the base to OFF. You can still make or receive calls using this phone. Telephones on the same line (and the phone's handset if it is away from the base) still ring when there is an incoming call.
To turn on the base's ringer, set RINGER to ON.
SETTING THE HANDSET’S RINGER TONE/VOLUME
You can select one of four different ring- er tone/volume settings while the phone is not in use. Press 8 or 9 on the handset to increase or decrease to the ringer level setting. Repeatedly press
8or 9 until you hear the desired ring- er setting. Each time you press 8 or 9, the ringer changes and the display shows Ringer A High, Ringer A Low, Ringer B High, or Ringer B Low.
Note: Pressing 8 when the display shows Ringer A High or 9when the display shows Ringer B Low does not
10
change the setting. Press the other but- ton to change the setting.
SETTING AUTO TALK
Your phone is preset so you must press TALK to answer a call. With auto talk turned on, you can answer a call by just lifting the handset from the base, or, if the handset is away from the base, by pressing any key.
Follow these steps to turn auto talk on or off.
1.Lift the handset and hold down CALL ID until the Caller ID setup menu appears with Auto Talk selected.
2.Press SELECT to change the auto talk setting. On or Off appears indi- cating the selected setting.
3.Press CALL ID or return the handset to the base to store the new setting.
TURNING CALLER ID/ CALL WAITING ON/OFF
If you have Call Waiting with Caller ID service, you can set the phone to show Caller ID information for an incoming call even while you are already on the phone.
Follow these steps to turn the Caller ID/ Call Waiting feature on or off.
