Advanced
Equalizer Settings
These settings are set automatically by the Automatic Speaker Setup function (see page 40).
With these settings, you can adjust the tone of each speaker. The volume of each speaker can be set on page 73.
1 | RECEIVER | Press the [RECEIVER] REMOTE | |
MODE button, followed by the | |||
|
|
[SETUP] button.
The main menu appears onscreen.
5
ENTER
ENTER
Use the Down [ ] button to select “b. Channel,” and then use the Left and Right [
]/[
] but- tons to select a speaker.
a.Use Settings:Manual
b.Channel :Left
c. | 80Hz | : 0dB |
d. 250Hz | : 0dB | |
e. 800Hz | : 0dB | |
f.2.5kHz | : 0dB | |
g. | 8kHz | : 0dB |
2 |
| Use the Up and Down [ ]/[ ] |
|
| |
|
| buttons to select “3. Speaker |
|
| Setup,” and then press [ENTER]. |
| ENTER | The Speaker Setup menu appears. |
|
|
ENTER
3 |
| Use the Up and Down [ ]/[ ] |
|
| |
|
| buttons to select “Equalizer Set- |
|
| tings,” and then press [ENTER]. |
| ENTER | The Equalizer Settings menu appears. |
|
|
ENTER
4 | Use the Left and Right [ ]/[ ] |
| |
| buttons to set the “a. Use Set- |
| tings” option to: |
ENTER | Off: Equalizer off, flat response. |
| Auto: The equalizer for each |
| speaker is set automatically |
| by the Automatic Speaker |
| Setup function. |
| Manual: The equalizer for each |
| speaker can be set manually. |
| If you selected Manual, continue with |
| the next step. If you selected Off or |
| Auto, go to step 8. |
6 | Use the Up and Down [ ]/[ ] |
| |
| buttons to select a frequency, |
| and then use the Left and Right |
| ENTER |
| [ ]/[ ] buttons to cut or boost |
| that frequency. |
Each band can be cut or boosted from
Tip: Low frequencies (e.g., 80Hz) affect bass sounds; high frequencies (e.g., 8kHz) affect treble sounds.
7 |
| Use the Up [ ] button to select |
|
| |
|
| “b. Channel,” and then use the |
| ENTER | Left and Right [ ]/[ ] buttons to |
|
| select another speaker. |
|
| Repeat steps 6 and 7 for each speaker. |
| ENTER |
|
8 | Press the [SETUP] button. |
| |
| Setup closes. |
Notes:
•This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.
•The Equalizer Settings have no effect on 176.4/192 kHz signals.
75
