Zone 2—Continued
Powered Zone 2 Setting
If you’ve connected your Zone 2 speakers to this AV receiver, as explained in “Using Only Speakers in Zone 2” on page 82, you must set the “Powered Zone 2” setting to “Act” (Activated) as explained here.
1 RECEIVER | Press the [RECEIVER] REMOTE | |
MODE button, followed by the | ||
| ||
| [SETUP] button. | |
| The main menu appears onscreen. | |
2 | Use the Up and Down [ ]/[ ] | |
| buttons to select “8. Hardware | |
ENTER | Setup,” and then press [ENTER]. | |
| The Hardware Setup menu appears. | |
ENTER |
|
Using Zone 2
This section explains how to turn Zone 2 on and off, how to select an input source for Zone 2, and how to adjust the volume for Zone 2.
Controlling Zone 2 from the AV receiver
| 1 |
| 2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| MASTER VOLUME |
STANDBY/ON |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| STANDBY |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ZONE 2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
POWER |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
ON | OFF |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PURE AUDIO |
| MULTI CH | DVD | VIDEO 1 | VIDEO 2 | VIDEO 3 | VIDEO 4 |
| TAPE | TUNER | CD | PHONO | DISPLAY |
|
|
| |
| PHONES |
|
|
|
|
|
| TUNING |
|
|
|
| ENTER | SETUP MIC | VIDEO 4 INPUT |
| |
| ZONE 2 | OFF | TONE | STEREO |
| DIMMER | MEMORY | MODE | SETUP |
|
| RETURN |
|
|
| ||
|
|
|
|
| LISTENING MODE | CLEAR |
| PRESET | PRESET |
|
|
|
|
|
| ||
|
|
| ZONE 2 LEVEL |
|
|
|
|
|
|
| TUNING |
|
| DIGITAL | S VIDEO | VIDEO | L AUDIO R |
1 | To turn on Zone 2 and select an |
| |
ZONE 2 | input source, press the [ZONE 2] |
| button repeatedly. |
3
ENTER
ENTER
Use the Up and Down [
]/[ ] buttons to select “Powered Zone2,” and use the Left and Right [
]/[
] buttons to select:
8.Hardware Setup
a.PoweredZone2:NotAct
b.TV Format :Auto
c.AM Freq. Step: 9kHz
d.Remote ID | :1 |
Not Act: ZONE 2 SPEAKERS termi- nals not activated.
Act: ZONE 2 SPEAKERS terminals activated.
When Act is selected and Zone 2 is turned on, the speakers connected to the ZONE 2 SPEAKERS terminals will output sound, but the speakers con- nected to the SURROUND BACK SPEAKERS terminals will not. When Zone 2 is turned off, even if Act is selected, the surround back speakers will work as normal.
Alternatively, press the [ZONE 2] button followed by an input selector button within 8 seconds.
Zone 2 turns on, the ZONE 2 indicator lights up, and the ZONE 2 12V TRIG- GER OUT goes high (+12 V).
To select AM, FM, or XM (North American model only), press the [TUNER] input selector button repeat- edly.
To select the same source as that of the main room, press the [ZONE 2] button repeatedly until “Zone 2 Sel: Source” appears.
2 | To turn off Zone 2, press the |
OFF |
ZONE 2 [OFF] button.
4 | Press the [SETUP] button. |
| |
| Setup closes. |
Note:
•This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.
83
