Onkyo SR804 THX Audio Setup, Buttons to select THX Audio, Buttons to specify the surround

Advanced Setup—Continued

THX Audio Setup

This setting is not set automatically by the Automatic Speaker Setup function (see page 40).

This setting is only available if the SurrBack Ch setting in the Speaker Configuration is set to 2ch.

With this setting, you can specify the distance between your surround back speakers. To get the best from THX’s ASA (Advanced Speaker Array) technology, these speakers should be placed as close together as possible.

1	RECEIVER	Press the [RECEIVER] REMOTE
		MODE button, followed by the

[SETUP] button.

The main menu appears onscreen.

2		Use the Up and Down [ ]/[ ]
		buttons to select “3. Speaker
		Setup,” and then press [ENTER].
	ENTER	The Speaker Setup menu appears.

ENTER

3		Use the Up and Down [ ]/[ ]
		buttons to select “THX Audio
		Setup,” and then press [ENTER].
	ENTER	The THX Audio Setup menu appears.
		3-5.THX Audio Setup
		------------------------
		a.SurrBack Sp Spacing
		: 0-1ft
	ENTER

4	Use the Left and Right [ ]/[ ]
	buttons to specify the surround
	back speaker spacing:
	0–1 ft (0–0.3 m) (Default): Select this
	ENTER
	if the speakers are between 0 and 1 foot
	(0–30 cm) apart.
	1–4 ft (0.3–1.2 m): Select this if the
	speakers are between 1 and 4 feet
	(0.3–1.2 m) apart.
	>4 ft (>1.2 m): Select this if the speak-
	ers are more than 4 feet (1.2 m) apart.
5	Press the [SETUP] button.
	The setup menu closes.

Note:

•This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

74