Changing the Input Display, Minimum Speaker Impedance

First Time Setup—Continued

Changing the Input Display

If you connect an -capable Onkyo MiniDisc recorder, CD recorder, or next generation HDD-compat- ible component, such as the Remote Interactive Dock, to

the TAPE IN/OUT or VIDEO 3 IN jacks, for to work properly, you must change this setting.

This setting can only be changed on the AV receiver.

											MASTER VOLUME
STANDBY/ON
	STANDBY
	ZONE 2
POWER
ON OFF
PURE AUDIO	MULTI CH	DVD	VIDEO 1	VIDEO 2	VIDEO 3	VIDEO 4	TAPE	TUNER	CD	PHONO	DISPLAY

PUSH TO OPEN

		1, 2	1, 2
1		Press the [TAPE] or [VIDEO 3]
1	TAPE	input selector button so that
		input selector button so that
		“TAPE” or “VIDEO3” appears on
		the display.
	or
	VIDEO 3

Minimum Speaker Impedance

If you change this setting, you must run the automatic speaker setup again (see page 40).

If the impedance of any speaker is 4 ohms or more but less than 6, set the Minimum Speaker Impedance to 4 ohms.

Note:

Before you change this setting, turn down the volume.

1	RECEIVER	Press the [RECEIVER] button,
		followed by the [SETUP] button.

The main menu appears onscreen.

2	Use the Up and Down [ ]/[ ]
	buttons to select “3. Speaker
	Setup,” and then press [ENTER].
ENTER	The Speaker Setup menu appears.
	The Speaker Setup menu appears.
	3.Speaker Setup
	------------------------
	1.Speaker Impedance
	2.Speaker Configuration
ENTER	3.Speaker Distance
	4.Level Calibration
	5.THX Audio Setup
	6.Equalizer Settings

TAPE

VIDEO 3

Press and hold down the [TAPE] or [VIDEO 3] input selector but- ton (about 3 seconds) to change the setting.

Repeat this step to select MD, CDR, or HDD.

For the TAPE input selector, the setting changes in this order:

TAPE → MD → CDR → HDD →

For the VIDEO 3 input selector, the set- ting changes in this order:

VIDEO 3 → HDD → VIDEO 3 →

3	Use the Up and Down [	]/[	]
	buttons to select “Speaker
	Impedance,” and then press
	[ENTER].
4	Use the Left and Right [	]/[	]
	buttons to select:
	4 ohms: Select if the impedance of any
ENTER	speaker is 4 ohms or more but
	less than 6.

6 ohms: Select if the impedances of all speakers are between 6 and 16 ohms.

Note:

HDD can be selected for the TAPE input selector or VIDEO 3 input selector, but not both at the same time.

5	Press the [SETUP] button.
	Press the [SETUP] button.
	Setup closes.

Notes:

•This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

SR804 specifications

The Onkyo SR804 is a high-performance A/V receiver that has established itself as a favorite among home theater enthusiasts. Designed to deliver an immersive audio and visual experience, the SR804 boasts an array of features and technologies that enhance its performance and usability.

At the heart of the Onkyo SR804 is its robust amplification system, which provides a substantial power output of 130 watts per channel at 8 ohms. This ensures a dynamic sound reproduction that can fill large rooms with clarity and depth. The receiver supports multiple audio formats, including Dolby TrueHD and DTS-HD Master Audio, enabling it to decode high-definition audio tracks from Blu-ray discs, delivering a cinema-like experience in the home.

One notable feature of the SR804 is its advanced video processing capabilities. It supports HDMI 1.3, allowing for high-definition video signals up to 1080p. The receiver can upscale standard-definition content to high definition, ensuring that all media is presented at the best possible quality. Additionally, the SR804 features multiple HDMI inputs, accommodating various devices such as gaming consoles, Blu-ray players, and streaming devices.

The Onkyo SR804 is designed with users in mind, featuring an intuitive GUI (Graphical User Interface) that simplifies navigation and setup processes. The included remote control is comprehensive, providing easy access to settings and features without the need to navigate through complex menus. Moreover, the receiver supports Audyssey MultEQ technology, which analyzes the room's acoustics and optimizes audio performance, providing a tailored sound experience for various room sizes and layouts.

Another key characteristic of the Onkyo SR804 is its versatility in connectivity options. In addition to HDMI, it offers optical and coaxial digital inputs, along with analog inputs for a variety of audio sources. The receiver also features a zone 2 output, allowing users to set up a separate audio zone, perfect for multi-room audio installations.

The appealing design of the Onkyo SR804 combines functionality with aesthetics. Its sleek black finish and elegant display make it a fitting addition to any home theater setup.

In summary, the Onkyo SR804 is a feature-rich A/V receiver that excels in performance, versatility, and user-friendliness. Its powerful amplification, advanced audio and video technologies, and intuitive interface make it an ideal choice for anyone looking to enhance their home entertainment experience. Whether for movie nights, gaming, or streaming, the Onkyo SR804 stands out as a reliable and impressive component in any home theater setup.

Onkyo SR804 instruction manual Changing the Input Display, Minimum Speaker Impedance

Models: SR804

First Time Setup—Continued

Changing the Input Display

DISPLAY

Minimum Speaker Impedance

Press the [RECEIVER] button,

followed by the [SETUP] button.

The main menu appears onscreen.

Use the Up and Down [ ]/[ ]

Setup,” and then press [ENTER].

The Speaker Setup menu appears.

[ENTER].

Use the Left and Right [

buttons to select:

less than 6.

Press the [SETUP] button.

Setup closes.

SR804 specifications