Common Functions—Continued

Using the Sleep Timer

With the sleep timer, you can set the AV receiver so that it turns off automatically after a specified period.

SLEEP

Press the remote controller’s

[SLEEP] button repeatedly to select the required sleep time.

You can set the sleep time from 90 to 10 minutes in 10 minute steps.

The SLEEP indicator appears on the display when the sleep timer has been set, as shown. The specified sleep time appears on the display for about 5 sec- onds, then the previous display reap- pears.

SLEEP indicator

To cancel the sleep timer, press the [SLEEP] button repeatedly until the SLEEP indicator disappears.

To check the remaining sleep time, press the [SLEEP] button. Note that if you press the [SLEEP] button while the sleep time is being displayed, you’ll shorten the sleep time by 10 minutes.

Using Headphones

For private listening, you can connect a pair of stereo headphones (1/4-inch phone plug) to the AV receiver’s PHONES jack.

STANDBY/ON

STANDBY

ZONE 2

POWER

ON OFF

PURE AUDIO

PHONES

 

ZONE 2

OFF

Notes:

Always turn down the volume before connecting your headphones.

The speakers are turned off while the headphones plug is inserted in the PHONES jack. (The Zone 2 speakers are unaffected.)

When you connect a pair of headphones, the listening mode is set to Stereo, unless it was set to Pure Audio, Mono, Stereo, or Direct, in which case it stays the same.

Displaying Source Information

You can display various information about the current input source as follows.

Remote

Press the [DISPLAY] button

controller

repeatedly to cycle through the

 

DISPLAY

available information.

 

AV receiver

 

DISPLAY

 

The following information can typically be displayed:

Input source & volume

Signal format* or sampling frequency

Input source & listening mode

*If the input signal is analog, no format information is displayed. If the input signal is PCM, the sampling fre- quency is displayed. If the input signal is digital but not PCM, the signal format is displayed.

If the input signal is multichannel PCM, the sampling frequency and signal format will be displayed. Informa- tion is displayed for about 3 seconds, then the previous display reappears.

Interpreting Surround Channel Information

AB C

A:The number of front channels (front left, front right, and center).

B:The number of surround channels (surround left and surround right). If there’s surround back channel information, this number will be 3.

C:LFE channel for subwoofer (1 means yes).

59

Page 59
Image 59
Onkyo SR804 instruction manual Common Functions, Using the Sleep Timer, Using Headphones, Displaying Source Information

SR804 specifications

The Onkyo SR804 is a high-performance A/V receiver that has established itself as a favorite among home theater enthusiasts. Designed to deliver an immersive audio and visual experience, the SR804 boasts an array of features and technologies that enhance its performance and usability.

At the heart of the Onkyo SR804 is its robust amplification system, which provides a substantial power output of 130 watts per channel at 8 ohms. This ensures a dynamic sound reproduction that can fill large rooms with clarity and depth. The receiver supports multiple audio formats, including Dolby TrueHD and DTS-HD Master Audio, enabling it to decode high-definition audio tracks from Blu-ray discs, delivering a cinema-like experience in the home.

One notable feature of the SR804 is its advanced video processing capabilities. It supports HDMI 1.3, allowing for high-definition video signals up to 1080p. The receiver can upscale standard-definition content to high definition, ensuring that all media is presented at the best possible quality. Additionally, the SR804 features multiple HDMI inputs, accommodating various devices such as gaming consoles, Blu-ray players, and streaming devices.

The Onkyo SR804 is designed with users in mind, featuring an intuitive GUI (Graphical User Interface) that simplifies navigation and setup processes. The included remote control is comprehensive, providing easy access to settings and features without the need to navigate through complex menus. Moreover, the receiver supports Audyssey MultEQ technology, which analyzes the room's acoustics and optimizes audio performance, providing a tailored sound experience for various room sizes and layouts.

Another key characteristic of the Onkyo SR804 is its versatility in connectivity options. In addition to HDMI, it offers optical and coaxial digital inputs, along with analog inputs for a variety of audio sources. The receiver also features a zone 2 output, allowing users to set up a separate audio zone, perfect for multi-room audio installations.

The appealing design of the Onkyo SR804 combines functionality with aesthetics. Its sleek black finish and elegant display make it a fitting addition to any home theater setup.

In summary, the Onkyo SR804 is a feature-rich A/V receiver that excels in performance, versatility, and user-friendliness. Its powerful amplification, advanced audio and video technologies, and intuitive interface make it an ideal choice for anyone looking to enhance their home entertainment experience. Whether for movie nights, gaming, or streaming, the Onkyo SR804 stands out as a reliable and impressive component in any home theater setup.