MASTER ARM ? COMMAND 1
Turn the Entire System On With Delays
Description
Use this function to turn on the entire system, both perimeter and interior. When you turn the system on, the display shows how many seconds of exit delay time you have to exit the protected area. You should leave before exit delay time expires.
Leaving after exit delay expires causes entry delay to start. You may also cause an alarm on an interior device. Enter your personal passcode to disarm the system.
This function may be used by your cleaning service, a serviceman, or others to turn on your system when they leave.
Using Master Arm:
1.The display shows disarmed idle text.
2.Press the COMMAND bar. The display shows
SYSTEM COMMAND.
3.Press the 1 key.
Note: If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function. Press the MENU key to enter the Command Menu, then press NEXT repeatedly until you reach the MASTER ARM ? prompt. Press ENT. MASTER ARM ALL ? displays. Press ENT.
4.The display shows ARMING for two seconds, then displays EXIT NOW # (# = exit delay time remaining). After the exit delay time expires, the display changes to idle armed text.
5.To disarm your security system, enter your personal passcode and press ENT.
1
