WALK TEST ? continued
4.The burglary bell sounds for 2 seconds. When the display panel shows ## PTS TO TEST you can begin. Test each point by first opening and then closing the door or window. Check the display after testing each point. For interior points, walking past the device once is sufficient. If any point does not test correctly, contact your security company for service.
5.During the Walk Test you may want to see the points that remain untested. When point text is displayed, press ESC. The display shows ## PTS TO TEST. Press the ESC key. VIEW UNTESTED ? is displayed. Press ENT. The display shows ## PTS UNTESTED. Press NEXT to see a list of the points that have not yet been tested. Move through this list by pressing the NEXT key. To resume the Walk Test, press ESC. # PTS UNTESTED is displayed. Press ESC. ## PTS TO TEST is displayed. Resume testing points. To end the Walk Test, press ESC twice.
6.When all points have been tested, 0 PTS TO TEST is displayed. Press ESC. The display momentarily shows ALL PTS TESTED before returning to idle text.
