ADT Security Services 8112 manual Watch Mode ? Command, Entering Watch Mode, Exiting Watch Mode

WATCH MODE ? COMMAND 6

Watch Mode

Description

With your security system disarmed, you can use watch mode to monitor some points. Each time some points are faulted (door or window is opened) the command center chimes once and displays the point text for 60 seconds. No alarms are generated by this mode except 24-hour alarms (fire, panic, etc.).

When the command center’s keypad lighting is on, the command center does not chime. The keys light for 20 seconds whenever you strike a key.

Use this function in residential systems to monitor entries or exits in your home. In commercial systems it can serve as a door chime to alert you when a customer or delivery person enters your business.

Note: Contact your security company to find out which points are watch points and whether or not your system automatically turns the Watch Mode on whenever you disarm.

Entering Watch Mode:

1.Ensure your command center is at disarmed idle text.

2.Press the COMMAND bar. The display shows

SYSTEM COMMAND.

3.Press the 6 key.

Note: If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function. Press the MENU key to enter the Command Menu, then press NEXT repeatedly until you reach the WATCH MODE ? prompt. Press ENT.

4.The display briefly shows WATCH IS NOW ON before returning to idle disarmed text.

Exiting Watch Mode:

1.Ensure your command center is at disarmed idle text.

6