ADT Security Services 8112 System Trouble Displays, Servc Batt Low, Call For Service, Servc Panel

System Trouble Displays

If you see any of the system trouble displays shown below, contact your security company to determine whether repairs are needed.

SERVC BATT LOW

Indicates the security system’s battery is low, or temporarily draining faster than the system can charge it. If this display remains or appears frequently, call your security company for service.

CALL FOR SERVICE

Call your security company. Your security system may have failed.

SERVC BATT MSING

Indicates the security system’s battery is disconnected or shorted.

SERVC PANEL

Indicates a problem with the panel. The panel is not operating. Call your security company for service.

SERVC PARAM

Indicates a problem with the panel. Your panel may not be operating properly. Call your security company for service.

SERVC AC FAIL

Indicates that AC power to the security system is interrupted. Check the plug-in transformer and circuit breaker. Entering COMMAND 4 silences the trouble buzz. The display clears when AC power returns.

SERVC COMM FAIL

Your security system makes repeated attempts to communicate with the security company. In the event your security system fails to communicate, the command center buzzes and displays SERVC COMM FAIL. Notify your security company of the communication trouble.

SERVC KEYPAD

Indicates that a command center, other than the one displaying the message, is in a trouble condition. Notify your security company.