System Commands & Functions
Below is a summary of the commands covered in this guide. Some of these functions may not be available in your system. If you attempt to enter a function that’s not available, COMMAND DISABLED appears in the display for a few moments before the display returns to idle text. If the function is available in the system but your passcode is not authorized to perform the function, then NOT AUTHORIZED will display on the Command Center.
Press the COMMAND bar and then the one or two digits shown in the table below to perform the function. When you use a command to perform a function, the displays in the function list below do not appear at your command center.
Command | Function |
CMD 1 | MASTER ARM |
CMD 1 1 | MASTER ARM INSTANT |
CMD 2 | PERIMETER INSTANT |
CMD 3 | PERIMETER DELAY |
CMD 4 | SILENCE THE TROUBLE SOUNDER & |
| CLEAR TROUBLE DISPLAYS |
CMD 4 0 | VIEW MEMORY |
CMD 4 4 | WALK TEST |
CMD 4 7 | RESET SENSORS |
CMD 6 | WATCH MODE |
CMD 7 | SPECIAL ALERT |
CMD 8 | PERIMETER PARTIAL |
CMD 9 | SPECIAL ALERT |