View Faulted or Bypassed Points
To properly arm your system, all the doors and windows in the system must be in the normal (not faulted) condition. Viewing the faulted points helps you find faulted points and correct them so proper arming is possible.
Your command center offers two ways of displaying faulted and bypassed point information. The first causes the faulted or bypassed point information to scroll automatically through the display. The second allows you to manually scroll through each individual point description.
To automatically scroll faulted or bypassed points:
1.Ensure your command center shows idle text.
2.Press any number key. If there are faulted points, AREA 1 ## FAULT (## = total number of faulted points) is displayed first. This display is followed by the point text descriptions of the faulted points.
If there are bypassed points, AREA 1 ## BYPAS (## = total number of bypassed points) is displayed, followed by the point text descriptions of the bypassed points. These displays scroll at the rate of 2 seconds each. If there are no faulted or bypassed points, the displays will not appear. Instead, the display shows NO FAULTS/BYPAS.
3.The display returns to idle text after scrolling through the faulted and bypassed point information. You may also press ESC to stop the display from scrolling.
To manually scroll faulted or bypassed points:
1.Ensure your command center shows idle text.
2.Press the NEXT key repeatedly to display the faulted and bypassed point information. If there are no faulted or bypassed points the displays will not appear. Instead, the display shows NO FAULTS/BYPAS.
3.You can return to idle text at any time by pressing ESC.
