VIEW MEMORY ? COMMAND 40
View Event Memory
Description
Your system stores events that occurred since the last time memory was cleared. Use COMMAND 40 to view Event Memory.
Event Memory allows you or a service technician to review events after they are cleared from the command center’s display. ALARM SILENCED may scroll to remind you that events are stored in Event Memory.
Each time you turn the system on, the Event Memory is erased and the ALARM SILENCED message is cleared.
Using View Memory:
1.Ensure your command center shows idle disarmed text.
2.Press the COMMAND bar. The display shows
SYSTEM COMMAND.
3.Press the 4 key, followed by the 0 key.
Note: If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function. Press the MENU key to enter the Command Menu, then press NEXT repeatedly until you reach the VIEW MEMORY
?prompt. Press ENT.
4.Your system displays event summary lines and point text in this order: fire alarm summary line, point text for each fire alarm event; alarm summary line, point text for each alarm event; fire trouble summary line, point text for each fire trouble event; trouble summary line, and point text for each trouble event. Press NEXT to scroll through the events. If there are no events to view, NO EVENTS displays.
5.Return to idle text at any time by pressing ESC.
40
