XiNCOM XC-DPG402, XC-DPG502 4: Advanced Configuration

XiNCOM Corp.

4: Advanced Configuration

Overview

The following advanced features are provided.

• Host IP Setup

• Access Filter

• Block URL

• Virtual Servers

• Special Applications

• Dynamic DNS

• Multi DMZ

• Advanced Features

• Password

• Upgrade Firmware

This chapter contains details of the configuration and use of each of these features.

Host IP Setup

This feature is used in the following situations:

• You have Multi-Session PPPoE, and wish to bind each session to a particular PC on your LAN.

• You wish to use the Access Filter feature. This requires that each PC be identified by using the

Host IP Setup screen.

• You wish to have different Block URL settings for different PCs. This requires that each PC be

identified by using the Host IP Setup screen. (You do not have to use the Host IP feature to

apply the same Block URL settings to all PCs.)

• You wish to reserve a particular (LAN) IP address for a particular PC on your LAN. This allows

the PC to use DHCP (Windows calls this "Obtain an IP address automatically") while gaining the

benefits of a fixed IP address. The PC's IP address will never change, so it can be provided to

other people and applications.

Page 27

Contents

Main Page TABLE OF CONTENTS Page 1: Introduction Twin WAN Router Features Twin WAN Router Features (Continued) Warranty Information Package Contents Physical Details Front Panel of XC-DPG402: Front Panel of XC-DPG502: Front Panel of XC-DPG602: Page Rear Panel Note: Default Settings TFTP Download 2: Basic Setup Overview Requirements 1: Configuring the XC-DPG Twin WAN Router for your LAN No Response? Settings LAN & DHCP Page 2. Installing the XC-DPG Twin WAN Router in your LAN 3. Configuring the XC-DPG Twin WAN Router for Internet Access Settings Primary Setup Page 4: Configure PCs on your LAN Overview TCP/IP Settings Internet Access For Windows 9x/2000 Macintosh Clients Linux Clients Fixed IP Address To act as a DHCP Client (recommended) 3: Advanced Port Setup Overview Port Options Settings Port Options Load Balance Settings Load Balance Page Advanced PPPoE Settings Advanced PPPoE Advanced PPTP Settings Advanced PPTP 4: Advanced Configuration Overview Host IP Setup Settings Host IP Setup Static Routing: Static Routing Entry: Page Access Filter Settings Block URL Page Block URL Settings Block URL Virtual Servers Connecting to the Virtual Servers Settings Virtual Server Custom Virtual Servers Settings Custom Virtual Servers Page Special Applications Settings Special Applications Using a Special Application on your PC Dynamic DNS To use the Dynamic DNS feature Settings Dynamic DNS Multi DMZ Settings Multi DMZ UPnP (Available in the XC-DPG502) Settings UPnP SNMP Settings SNMP Email Alert Settings Email Alert Syslog Syslog Configuration Advanced Features Settings Advanced Features Page U e sing Remote W b-based Setup 7: QoS Configuration (502 and 602 ONLY) Overview QoS Setup Data QoS Setup. Policy Configuration Data Policy Configuration. Page Admin Password Screen Upgrade Firmware 5: Advanced LAN Configuration verview Routing O Existing DHCP Server Configuring Other Routers on your LAN Static Routing - Example F C-DP or the X G Twin WAN Router Gateway's Routing Table For Router A's Default Route Page 6: QoS Configuration Overview QoS Setup Data QoS Setup. Policy Configuration Data Policy Configuration. 7: Operation and Status Data System Status Restore Factory Defaults WAN Status Da stem Status ta Sy NAT Status Data NAT Sta tus Page Appendix A S tio pecifica ns FCC Statement CE Marking Warning Appendix B Windows TCP/IP Setup Overview T Sett CP/IP ings f using t lt XC-DPG Tw Checking TCP/IP Settings - Windows 9x/ME: Using DHCP Using "Specify an IP Address" Checking TCP/IP Settings - Windows 2000: Using DHCP Using a fixed IP Address ("Use the following IP Address") Page Using DHCP Using a fixed IP Address ("Use the following IP Address") Appendix C Troubleshooting Overview General Problems Internet Access