XiNCOM Corp.
Access Filter The network Administrator can use the Access Filter to gain fine control over the Internet access and
applications available to LAN users.
• Five (5) user groups are available, and each group can have different access rights.
• All PCs (users) are in the Default group, unless assigned to another group on the Host IP screen.
Figure 15: Access Filter
Settings – Block URL
Setup Access Group This allows you have different access rights for different Groups of PCs.
• If you want the same restrictions to apply to everyone, select
Default for the Group. In this case, there is no need to enter any
Hosts on the Host IP screen.
• If you wish to apply different restrictions on different Groups, select
the desired Group, and click the "Select" button. The screen will
update with data for the selected Group.
Page 31