XiNCOM XC-DPG602 manual Settings Advanced PPPoE

Advanced PPPoE

Figure 8. Advanced PPPoE

The screen is required in order to use multiple

PPPoE sessions on the same WAN port.

It can also be used to manually connect or disconnect a PPPoE session.

Settings - Advanced PPPoE

WAN Port	Select the desired Port and Session, then click the “Select” button. The data for the selected Port/Session will then be displayed in the
PPPoE Session	WAN IP Account section.
WAN IP Account	• User Name – Enter the PPPoE user name assigned by your ISP.
	• Password – Enter the PPPoE password assigned by your ISP.
	• Verify Password – Re-enter the PPPoE password assigned by your ISP.
	• IP Address – If you have a fixed IP address, enter it here. Otherwise, this field should be left at 0.0.0.0.
	• Host Name – This field is used by a Host to uniquely associate an access concentrator to a particular Host request.
Action	Use the “Connect” and “Disconnect” buttons to establish or terminate a connection on this session.
Connection Status	This displays the current connection status for each session.

19