INSTALLATION AND SETUP
The initial set up of the Wireless USB adapter set is a standard Windows installation process, similar to driver installation of USB devices. It does not require any technical skills or understanding of wireless technology, and can be easily performed with the help of the “Getting Started” leaflet (on the right). The entire process setup takes
1.The package includes the two adapters, a table adapter, CD, and power supply.
2.Enter CD and follow instructions to install drivers & software.
3.Connect the PC adapter to PC.
4.Perform association (pairing) between the PC adapter and the device adapter. Pairing is done for security purposes, and is performed by attaching both adapters simultaneously to the PC. After a few seconds a message is displayed that pairing is complete.
5.Remove the device adapter from the PC and place it in the table adapter.
6.Attach a USB cable to connect a USB device (e.g, printer, hard disk drive) to the table adapter.
7.Connect the power supply to the table adapter.
8.Wireless USB communication is enabled and the PC can communicate with the USB device.
WWW.CABLESUNLIMITED.COM | PAGE 4 |
