Xirlink Veo Connect/Advanced Connect manual Windows Me

3) Search for a program named “cleanup” on your computer. The icon should

look like this . Double-click it to run the cleanup. Press Scan and Delete to entirely clean up the previous installation of the camera.

4)After the cleanup program has completed, press the Exit button.

5)Uninstall the Veo Connect/Advanced Connect software. (Start > Settings > Control Panel > Add/Remove Programs > Veo Connect/Advanced Con- nect) and restart the computer.

6)Reinstall the Veo camera software, restart the computer, and plug in the camera.

7)Try launching the Veo camera application again.

8)If this does not work, there could possibly be mismatched versions of the Windows system files. Replace the mismatched files with the files from the Veo Connect/Advanced Connect CD. The correct version of the Windows system files can be found under D:\Microsoft\WinXXXX where XXXX is the operating system you are using and D:\ is the letter of your CD ROM drive. To prevent any problems, backup the files that will be replaced before overwriting the files. These files are also available online at http://www.veoproducts.com.

B. Windows Me:

1)Click on a button named Update Driver. Click this button to update the driver.

2)Make sure Automatic search for a better driver. (Recommended) is selected, then press Next.

3)Windows Me will then proceed through a detection process, searching for better drivers.

4)After the detection process you will get this message:

46