XM Satellite Radio XMR6910 Display Set the Clock 12/24-hourClock, Reset, General Operation

XMR6910 OPERATION

General Operation

Display

Set the Clock

12/24-hour Clock

Programmable Display Priority

Programmable Clock Priority

Reset

When in AM/FM, CD or AUX mode:

Press DISP to select between clock and radio frequency (tuner mode), clock and CD elapsed time/track (CD mode), or clock and AUX (AUX mode).

When in XM Radio mode:

Press DISP to select between channel name, artist name, song title or clock.

With the unit on, press and hold DISP until clock begins to flash, then release. Press TUNE nnto adjust the hours and TUNE llto adjust the minutes. Press DISP momentarily to save the selected time.

The clock will display 12-hour time in U.S. frequency spacing mode (PM 10:00). In European frequency spacing mode, the clock will display 24-hour time (22:00).

In AM/FM tuner mode, press and hold DISP then press TUNE llto select function priority display. “FREQ” will momentarily appear in the display.

Note: "FUNC" will appear in XM, CD or AUX modes.

Radio frequency (tuner mode), XM information (XM mode), CD elapsed time/track (CD mode) or AUX (AUX mode) will be displayed by default.

Clock is accessed by pressing DISP momentarily.

Press and hold DISP then press TUNE nnto select time display priority. “TIME” will momentarily appear in the display. Clock will be displayed by default. Radio frequency, XM information, CD elapsed time/track or AUX is accessed by pressing DISP momentarily. Time display priority is not available in XM DIRECT band.

Programs unit to display clock/no clock when unit is off. Press and hold MODE then press PRESET 1 to select clock priority on/off.

Press and hold for more than 2 seconds to RESET the unit upon initial installation or if abnormal operation occurs. The reset button is located behind the faceplate.

6