XMR6910 OPERATION
Faceplate Removal
Power On/Off
Mode
Volume
Programmable
Shift Function
Loudness
Preset EQ Curves
General Operation
Press RELEASE and pull away from the left side to remove. To
Remove trim ring and install supplied Phillips head #1 screw through left side of mounting frame into faceplate.
Press POWER or any other button (except eject) to turn the unit on. Inserting a disc will turn the unit on automatically. Press POWER to turn the unit off.
Press MODE to select between AM/FM, *XM Radio, CD and auxiliary input. Modes of operation are indicated in the display.
*Optional XM Satellite Radio Receiver and subscription required for XM Radio operation.
Adjust volume using rotary encoder
Press and hold POWER for 3 seconds to program currently selected volume level. "ON VOL" and the current volume level will momentarily appear in the display.
Press SHIFT for 2 seconds to activate the SHIFT function. The SHIFT icon will appear in the display. In XM Radio mode, the SHIFT function must be active to access the LOUDNESS and EQ functions.
Press SHIFT again for 2 seconds to cancel.
Note:
The SHIFT function only applies to XM Radio operation.
Press LOUD to activate and deactivate loudness contour curve. Activating this feature will enhance the bass and treble frequencies when listening to music at low volumes.
Press EQ to select between POP, JAZZ, CLASSIC, BEAT, ROCK and OFF (default) equalization curves. Any adjustment to the Bass or Treble settings automatically cancels the current EQ curve (if one is selected).
5
