XM Satellite Radio XMR6910 XM Radio Activation, XM Radio Operation, Tuning Modes, Category Recall

XMR6910 OPERATION

Activating Your XM Receiver (Optional)

XM Radio Activation

1.Press MODE to select XM Radio.

2.Verify channel 1 (XM Preview Channel) is playing.

3.Select Channel 0. The XM receiver’s eight character Radio ID number will appear on the XMR6910 display.

The Radio ID number is also located on the top of the XM receiver unit.

4.Record the number here for future reference:

5.Activate your XM Satellite Radio service.

To subscribe, log onto http://www.xmradio.com/activation or call 1-800-852-9696.

Note:

You will need to keep your XMR6910 turned on for at least one hour after requesting activation to receive the full channel line-up.

XM Radio - Operation

Tuning Modes

Basic Channel Selection

Direct Channel Selection

Category Recall

Press BAND to select between XM DIRECT, XM1 and XM2 bands.

Press TUNE nnor TUNE llmomentarily to select the next available channel. Press and hold to advance quickly.

Press BAND to select XM DIRECT channel entry band. “DIRECT” will momentarily appear in the display. Enter the desired channel using preset buttons (1-0), then press FUNC for 3 seconds to confirm the selected channel. If the channel is not available, "CH ---" will momentarily appear in the display and the current channel will be retained.

Press FUNC once to display the category of the currently selected channel for 10 seconds. The CATEGORY icon will appear on the display.

9