Changes in Scene Memories and Libraries 5
Changes in Scene Memories and Libraries
In the TC EVENT screen, you can now register scenes in the
order of use, so that these scenes can be recalled manually, or
automatically according to the specified interval time.
The TC EVENT screen features the following additional func-
tions:

1EVENT RECALLING

Use the following three buttons to switch the event list
operation.
The upper part of the display will show indica-
tor if ENABLE [ALL MANUAL] is selected, or
indicator if ENABLE is selected.

2EVENT TRIGGER

This column indicates the way in which each event is
recalled.
Click the button to display the TC EVENT pop-up
window, then click one of the following three buttons to
select the recall condition.

Expanding the Event Recall function in

the TC EVENT screen

Button function
DISABLE The Event List function will not recall
scenes registered in the event list.
ENABLE
[ALL MANUAL]
Scenes registered in the event list will
be recalled only by manual operation. If
the list contains events for which a time
code has been specified, the candidate
event for recall will change as time
code progresses, but events will not
actually be recalled unless you recall
them manually.
ENABLE
Scenes registered in the event list will
be recalled according to the specified
condition (time code, interval, or man-
ual operation).
1
4

5

3
2
TC EVENT
Button function
MANUAL
You can use the EVENT RECALL button
in the EVENT RECALL section (4) or a
USER DEFINE switch to recall the event.
“[MANUAL]” appears in the EVENT TRIG-
GER column.
INTERVAL
The scene will be recalled when the spec-
ified time has elapsed since the preceding
scene was recalled. If you select this but-
ton, specify the INTERVAL TIME parame-
ter in the range of 0.1 through 999.9sec.
An “ ” symbol and the interval time will
appear in the EVENT TRIGGER column
of the event list.
TIME CODE
The scene will be recalled when the time
code (LTC or internal time code) reaches
the specified time. If you select this but-
ton, specify the time code (hours/minutes/
seconds/frames). The specified time code
will appear in the EVENT TRIGGER col-
umn of the event list.
Event that will be recalled manually
Events that will be recalled when the time
code reaches the specified time
Event that is recalled when the specified time has
elapsed since the preceding scene was recalled