18 Appendix

072: REV-X HALL, 073: REV-X ROOM,

074: REV-X PLATE

These effects are a newly-developed 2-in/2-out reverb algorithm. They

provide a high-density, richly reverberant sound quality, with smooth

attenuation, spread and depth that work together to enhance the original

sound. You can choose one of three programs to suit the acoustic sound

field and your intentions: REV-X Hall, REV-X Room, and REV-X Plate.

*1. This value applies only when the effect type is REV-X PLATE, with
ROOM SIZE set to 28. The setting range varies depending on the
effect type and the ROOM SIZE value.

075: COMP276

This effect emulates the characteristics of analog compressors that are

widely used in recording studios. It will produce a thick, strong frame

sound suitable for drums and bass. You can control two monaural

channels independently.

076: COMP276S

This effect emulates the characteristics of analog compressors that are

widely used in recording studios. It produces a thick, strong frame

sound suitable for drums and bass. You can link and control the L and

R channel parameters.

077: COMP260

This effect emulates the characteristics of mid 70’s compressors/limit-

ers that are the standard for live SR. You can control two monaural

channels independently. You can also link several parameters via stereo

links.

VCM Effect Parameter List
Parameter Range Description
REV TIME 0.47–46.92 s *1 Length of reverberation
INI. DLY 0.0–125.0 ms Delay time until early reflection is
heard
HI. RATIO 0.1–1.0
The reverberation duration of the
high frequency range is expressed
as a ratio relative to REV TIME.
LO. RATIO 0.1–1.4
The reverberation duration of the low
frequency range is expressed as a
ratio relative to REV TIME.
LO. FREQ 22.0 Hz–18.0 kHz Reference frequency of LO. RATIO
DIFF. 0–10 Left and right directional spread of
reverb sound
ROOMSIZE 0–28 Size of space
DECAY 0–53 Speed at which the gate closes
HPF THRU, 22.0 Hz–
8.00 kHz
Cut-off frequency for the high pass
filter
LPF 1.00 kHz–
18.0 kHz, THRU
Cut-off frequency for the low pass fil-
ter
Parameter Range Description
INPUT 1 –180 to 0 dB
Adjusts the CH1 input level
OUTPUT 1 –180 to 0 dB
Adjusts the CH1 output gain
RATIO 1 2:1, 4:1, 8:1, 12:1,
20:1
Ratio for CH1 compressor
ATTACK 1 0.022–50.4 ms
Attack time for CH1 compressor
RELEASE1 10.88–544.22 ms
Release time for CH1 compressor
MAKE UP1 OFF, ON
Automatically corrects output gain
reduction when CH1 compressor is
applied
SIDEHPF1 OFF, ON
When the HPF in the side chain of the
CH1 compressor is turned on, the
compression applied to the low range
will be weakened, thus emphasizing
the low range.
INPUT 2 –180 to 0 dB
Adjusts the CH2 input level
OUTPUT 2 –180 to 0 dB
Adjusts the CH2 output gain
RATIO 2 2:1, 4:1, 8:1, 12:1,
20:1
Ratio of CH2 compressor
ATTACK 2 0.022–50.4 ms
Attack time of CH2 compressor
RELEASE2 10.88–544.22 ms
Release time of CH2 compressor
MAKE UP2 OFF, ON
Automatically corrects output gain
reduction when the CH2 compressor
is applied
SIDEHPF2 OFF, ON
When the HPF in the side chain of the
CH2 compressor is turned on, the
compression applied to the low range
will be weakened, thus emphasizing
the low range.
Parameter Range Description
INPUT –180 to 0 dB Adjusts the input level
OUTPUT –180 to 0 dB Adjusts the output gain
RATIO 1:2, 4:1, 8:1, 12:1,
20:1 Ratio of the compressor
ATTACK 0.022–50.4 ms
Attack time of the compressor
RELEASE 10.88–544.22 ms
Release time of the compressor
MAKE UP OFF, ON
Automatically corrects output gain
reduction when the compressor is
applied
SIDE HPF OFF, ON
When the HPF in the side chain of
the compressor is turned on, the
compression applied to the low
range will be weakened, thus
emphasizing the low range.
Parameter Range Description
THRE.1 –60 to 0.0 dB Threshold of CH compressor
KNEE1 SOFT, MEDIUM,
HARD Knee of CH1 compressor
ATTACK1 0.01–80.0 ms Attack time of CH1 compressor
RELEASE1 6.2–999 ms Release time of CH1 compressor
RATIO1 1.0–500, ∞Ratio of CH1 compressor
OUTPUT1 –20 to 40 dB Adjusts the CH1 output gain
THRE.2 –60 to 0.0 dB Threshold of CH2 compressor
KNEE2 SOFT, MEDIUM,
HARD Knee of CH2 compressor
ATTACK2 0.01–80.0 ms Attack time of CH2 compressor
RELEASE2 6.2–999 ms Release time of CH2 compressor
RATIO2 1.0–500, ∞Ratio of CH2 compressor
OUTPUT2 –20 to 40 dB Adjusts the CH2 output gain
ST LINK OFF, ON
Links CH1 and CH2 as a stereo pair.
THRE., KNEE, ATTACK, RELEASE,
and RATIO parameters are linked;
OUTPUT parameter is not linked