–9–1Battery negative lead
2Battery positive lead
3Starter motor lead
4Fuel sender lead
5Fuel tank drain hose
6Fuel tank breather hose (for DEU)
7Water hose
8Spark plug lead
9Clutch cable
10 Brake hose
11 Throttle cable
12 Right handlebar switch lead
13 Headlight lead
14 Meter light lead
15 Speed sensor lead
16 Carburetor heater hose
17 Vacuum hose (#1)
18 Vacuum hose (#2)
19 Coolant reservoir breather hose
20 Carburetor breather hose
21 Rear brake switch lead
22 CYCLELOCK lead
A Route the battery positive lead
and battery negative lead through
the clamp.
B Fasten the wireharness Coolant
breather hose and flasher relay
lead.
C Route the carburetor breather
hoses through the engine clamp.
D Fasten the carburetor air vent hose.
E Route the carburetor breather
hoses, vacuum hose (#1) down
ward and vacuum hose (#2) up-
ward through the guide.
F Route the vacuum hose (#1) inside,
vacuum hose (#2) outside through
the guide.
G Fasten the coolant reservoir hose.
H Fasten the wireharness right han-
dlebar switch lead meter lead and
headlight lead with a clamp.
I Route the relay lead through the
outside of wireharness.
CABLE ROUTING SPEC