–11–CABLE ROUTING SPEC
1Head light lead
2Wireharness
3Meter light lead
4Throttle cable
5Throttle stop screw cable
6Vacuum hose (#2)
7Vacuum hose (#1)
8Fuel tank breather hose
9Fuel hose
10 Carburetor air vent hose
11 Carburetor breather hose
12 Fuel tank drain hose
13 Fuel hose
14 Fuel sender lead
15 Starter motor lead
16 Battery positive lead
17 Battery negative lead
18 Coolant reservoir breather hose
19 Coolant reservoir hose
20 Fuel hose
21 Carburetor breather hose
22 Cylinder head breather hose
23 Air filter case breather hose
A Fasten the meter lead, headlight
lead wireharness with a clamp.
B Fasten the wireharness, coolant
reservoir hose with a clamp.
C Fasten the fuel hose with a clamp.
D Route the starter relay lead and
fuel sender lead through the guide
of bracket.
E Connect the coupler and insert the
protector.
F Fasten the taillight lead to the tail-
light bracket above left taillight with
a clamp and end of clamp is down-
ward.
G50 mm