–27–
EB802401
2. Battery
SCheck the condition of the battery.
Refer to “BATTERY INSPECTION”.
Open-circuit voltage
12.8 V or more at 20_C
SIs the battery OK?
YES NO
SClean the battery
terminals.
SRecharge or replace
the battery.
EB802411
3. Main switch
SCheck the main switch for continuity.
Refer to “SWITCH INSPECTION”.
SIs the main switch OK?
YES NO
Repalce the main
switch.
EB806400
4. Wiring
SCheck the entire signal system’s wiring.
Refer to “CIRCUIT DIAGRAM”.
SIs the signal system’s wiring properly con-
nected and withour defects?
YES NO
Properly connect or
repair the signal sys-
tem’s wiring
Check the condition
of each of the signal-
ing system’s circuits.
Refer to “SIGNAL
SISTEM CHECK.”
SIGNAL SYSTEM ELEC
NOTE:
SCheck the main and signaling system fuses
for continuity.
Refer to “FUSE INSPECTION”.
SAre the main and signaling system fuses OK?
1. Main and signal system fuses
YES NO
Replace the fuse(-s).
EB806010
TROUBLESHOOTING
SAny of the following fail to light: flasher
light, trun and fuel level indicator light.
SThe fuel meter fails to operate.
Check:
1. main and signal system fuses
2. battery
3. main switch
4. wiring
(of the entire signal system)
SBefore troubleshooting, remove the following
part(-s):
1) seats
2) fuel tank
3) air filter case
4) side cowlings
5) side covers
STroubleshoot with the following special tool(-s).
Pocket tester
90890-03112
EB802400