
Basic components
rious engine damage will occur.
1
ZMU01867
1. Oil level indicator
EMU26581
Overheat warning indicator (digital type)If the engine temperature rises too high, the warning indicator will start to blink. For further information on reading the indicator, see page 18.
ECM00050
CAUTION:
Do not continue to run the engine if the overheat warning indicator is on. Serious engine damage will occur.
1
ZMU01868
1. Overheat warning indicator
EMU26610
Trim meterThis gauge shows the trim angle of your outboard motor.
ZMU04581
NOTE:
Memorize the trim angles that work best for your boat under different conditions. Adjust the trim angle to the desired setting with the power trim and tilt switch.
EMU26620
Trim meter (digital type)This meter shows the trim angle of your outboard motor.
NOTE:
●Memorize the trim angles that work best for your boat under different conditions. Adjust the trim angle to the desired using the power trim and tilt switch.
●If the trim angle of your motor exceeds the trim operating range, the top segment on the trim meter display will blink.
ZMU01869
EMU26650
Hour meter (digital type)This meter shows the number of hours the
17