Basic components
engine has been run. It can be set to show the total number of hours or the number of hours for the current trip. The display can also be turned on and off.
Activation of warning device
●The engine speed will automatically de- crease to about 2000 r/min.
ZMU01870
●Changing the display format
●Pressing the “
” (mode) button chang- es the display format in the following pat- tern:
●Total hours→Trip hours→Display off
●Resetting the trip hours
●Simultaneously pressing the “
” (set)
and “
” (mode) buttons for more than 1 second while the trip hours are displayed resets the trip counter to 0 (zero).
NOTE:
The total number of hours the engine has been run cannot be reset.
EMU26801
Warning system
ECM00090
CAUTION:
Do not continue to operate the engine if a warning device has activated. Consult your Yamaha dealer if the problem cannot be located and corrected.
EMU26813
Overheat warning
This engine has an overheat warning device. If the engine temperature rises too high, the warning device will activate.
ZMU04766
●The overheat warning indicator will light (if equipped on the bottom cowling or the ta- chometer).
ZMU01757
●The buzzer will sound (if equipped on the tiller handle, remote control box, or main switch panel).
If the warning system has activated, stop the engine and check the cooling water inlet for
18