Operation
running, overheating and serious dam- | equipped) and move the remote control |
age could occur. Stop the engine and | lever quickly and firmly from neutral to |
check whether the cooling water inlet on | forward. |
the lower case or the cooling water pilot |
|
hole is blocked. Consult your Yamaha |
|
dealer if the problem cannot be located |
|
and corrected. |
|
|
|
ZMU03391
EMU27740
Shifting
EWM00180
WARNING
Before shifting, make sure there are no swimmers or obstacles in the water near you.
ECM00220
CAUTION:
To change the boat direction or shifting position from forward to reverse or vice- versa, first close the throttle so that the engine idles (or runs at low speeds).
EMU27763
Forward (tiller handle and remote control models)
Tiller control models
1.Place the throttle grip in the fully closed position.
2.Move the gear shift lever quickly and firmly from neutral to forward.
Remote control models
1. Pull up the neutral interlock trigger (if
EMU27784
Reverse (automatic reverse lock and power trim and tilt models)
EWM00190
WARNING
When operating in reverse, go slowly. Do not open the throttle more than half. Otherwise the boat could become unstable, which could result in loss of control and an accident.
Tiller control models
1.Place the throttle grip in the fully closed position.
2.Move the gear shift lever quickly and firmly from neutral to reverse.
Remote control models
1.Pull up the neutral interlock trigger (if equipped) and move the remote control lever quickly and firmly from neutral to reverse.
29