CONNECTIONS

See pages 7 - 8 when your amplifier has subwoofer (line out) terminal(s), or see pages 9 - 11 when your amplifier has no subwoofer (line out) terminal.

Notes

Do not connect the power cord of this unit and other components into an AC outlet until all connections between components are completed.

Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. Also, refer to the owner’s manual of your component to be connected to this unit.

The connection methods or the names of the terminals may differ depending on the component. Refer to the owner’s manual of your component as well.

1Connecting to the amplifier equipped with subwoofer (line out) terminal(s)

When your amplifier has a one-channel subwoofer terminal

Connect the subwoofer (or low pass etc.) terminal of your amplifier to the INPUT 3 ( L/MONO) terminal of this unit using a commercially available mono pin cable.

Mono pin cable (not included)

Subwoofer

 

 

 

OUTPUT

 

L MONO

L

R

TO SPEAKERS

L

 

R

R

 

 

 

INPUT

INPUT

 

 

 

3

2

 

 

 

 

 

R FROM AMPLIFIER

Amplifier

 

 

L

INPUT 1

When your amplifier has two-channel subwoofer terminals

Using one subwoofer

Connect the “L” side subwoofer terminal of your amplifier to the INPUT 3 ( L /MONO) terminal of this unit and “R” side subwoofer terminal of your amplifier to the INPUT 3 ( R ) terminal of this unit using a commercially available audio pin cable.

Notes

Some amplifiers have line output terminals labeled PRE OUT. When you connect this unit to the PRE OUT terminals of the amplifier, make sure that the amplifier has at least two sets of PRE OUT terminals. If the amplifier has only one set of PRE OUT terminals, do not connect this unit to the PRE OUT terminals. Instead, connect this unit to the speaker terminals of the amplifier (see pages 9 - 10).

When connecting to a monaural line output terminal of the amplifier, connect the INPUT 3 ( L /MONO) terminal.

When connecting to line output terminals of the amplifier, other speakers should not be connected to the OUTPUT terminals on the rear panel of this unit. If connected, they will not produce sound.

Subwoofer

 

 

 

OUTPUT

 

L MONO

L

R

TO SPEAKERS

L

 

R

R

 

 

 

INPUT

INPUT

 

 

 

3

2

 

 

 

 

 

R

FROM AMPLIFIER

L

 

 

 

INPUT 1

 

Audio pin

cable

(not included)

Amplifier

7En