Controls and functions
■Front panel
1
2
3
1Remote control sensor
Receives signals from the remote control.
2STANDBY/ON indicator
Green: Lights up when this unit is on.
Red: Lights up when this unit is in the standby mode.
Orange: Lights up when the sleep timer is on.
GETTING STARTED
SUBWOOFER SYSTEM
STANDBY | 1 | 2 | 3 | 1 | 2 | 3 | 8 |
PHASE | B.A.S.S. |
|
| PRESET |
|
| |
/ON |
|
|
|
| |||
|
|
|
|
|
| 7 | |
|
|
|
|
|
|
| |
| STANDBY |
|
|
|
|
|
|
| /ON | 140Hz |
|
|
|
|
|
| 40Hz |
| 0 |
| 10 |
| |
|
|
|
|
|
|
| |
|
|
|
| VOLUME |
|
|
4 5 6
6VOLUME control
Adjusts the volume level. Turn the control clockwise to increase the volume, counterclockwise to decrease the volume.
7B.A.S.S. indicators
Light up to indicate the currently selected B.A.S.S. number (1, 2 or 3) (see page 13).
3PHASE indicator
Green: Lights up when the phase is set in the reverse mode.
Red: Lights up when the phase is set in the regular mode.
4STANDBY/ON switch
Turns on or sets this unit to the standby mode.
Note
In the standby mode, this unit consumes a small amount of power.
5H-CUT control
Adjusts the high frequency cut off point depending on the connected front speakers or your preference (see page 13).
One graduation |
|
|
of this control |
|
|
represents 10 Hz. | 40Hz | 140Hz |
|
|
8PRESET indicators
Light up to indicate the currently selected PRESET number (1, 2 or 3) (see page 14).
Notes
•If you set this unit to the standby mode when one of the PRESET indicators is lit, no PRESET indicator lights up when you turn on this unit next time.
•The PRESET indicator turns off when you press any button other than PRESET 1, 2, or 3, or when you operate any other function of this unit.
3En