CONNECTIONS
Connecting to the ground terminal
If this unit or the amplifier makes a hamming noise when connecting to the speaker terminals of your amplifier, connect both of the GND (ground) terminals on your amplifier and this unit using commercially available grounding wire as shown in fig. A .
When your amplifier has no GND (ground) terminal, connect to the screw that fastens the top cover of your amplifier as shown in fig. B .
|
|
| OUTPUT |
|
L MONO | L | R | TO SPEAKERS | L |
R | R |
|
|
|
INPUT | INPUT |
|
|
|
3 | 2 |
|
|
|
|
| R | FROM AMPLIFIER | L |
|
|
| INPUT 1 |
|
AB
Note
When connecting the GND (ground) terminal, make sure the power cables of the amplifier and this unit are not plugged into the AC outlet.
Connecting the power cable
Plug the supplied power cable into the AC IN of this unit after all other connections are complete, and then plug the power cable to an AC outlet.
To the AC
outlet
Notes
•Do not use other power cables. Use the provided cable. Use of other power cables may result in fire hazard or electrical shock.
•Do not plug the power cable into the AC outlet of your amplifier. Doing so may create distorted sounds or turn off the power of your amplifier.
12En