![Rear Panel](/images/new-backgrounds/26980/2698037x1.webp)
Controls and Functions
Rear Panel
!1 !0
8MIC/INST Input Jack
Microphones and instruments such as gui- tars can be connected here using XLR or phone jack cables. Set the MIC/INST switch 2 to MIC or INST according to the type of device connected.
NOTE You can directly connect an elec- tric guitar or bass without the need for a separate DI (Direct Injection) box or amp simulator.
9LINE Input Jacks
These inputs are intended mainly for use with instruments and equipment having stereo outputs, such as a synthesizer or CD player.
■Input Signal Flow
Adjust the recording level as well as the balance between channels.
Input | 3 LEVEL Record |
| controls |
o i
If devices are connected to both phone and pin jacks, only the signal from the device connected to the phone jacks is input.
0STEREO OUT Jacks
These output the mixed signal from chan- nels 1 and 2. The output level can be adjusted using the OUT LEVEL control. These jacks would typically be connected to an audio system (monitor speakers).
NOTE You can use either the phone jacks or pin jacks but not both at the same time. If both jacks are used, the signal is only output from the phone jacks.
APHONES Jack
Connects a pair of headphones to this jack. The PHONES jack outputs the same signal as the STEREO OUT jacks.
5Level
indicator | Adjusts the |
| |
| monitor level. |
Playback 6 OUT LEVEL | Output |
control |
|
Cubase AI
AUDIOGRAM 3 Owner’s Manual | 19 |