Yamaha AV-90PY REAR, CENTER

10

10 Adjust the BALANCE control so that the effect sound output level of the left front speaker and the right front speaker are the same.

BALANCE

0

On the front panel of the unit.

L 5

5 R

11Make the sound output level of the center speaker the same as that of the front speakers with the CENTER

LEVEL key.

Illuminates.

Adjustable.

12Make the sound output level of the rear speakers the same as that of the front speakers with the REAR

LEVEL key.	Illuminates.

Adjustable.

13

Stop flashing and disappears.

Notes

●Once you have completed these adjustments, use only this unit’s VOLUME control to adjust listening volume. Do not change any other volume settings in this unit.

●If you use external power amplifiers, their volume controls may also be adjusted to achieve proper balance.

●In the step 11, if the center mode is in the “PHANTOM”, the sound output level of the center speaker can not be adjusted. Because in this mode, the center sound is automatically output from the left and right front speakers.

12

Contents

OWNER’S MANUAL CONTENTS FCC INFORMATION CAUTION: READ THIS BEFORE OPERATING YOUR UNIT SUPPLIED ACCESSORIES PROFILE OF THIS UNIT Digital Sound Field Processing Dolby Pro Logic Surround “ENHANCED” Dolby Pro Logic Surround SPEAKER SETTING UP FOR THIS UNIT SPEAKERS TO BE USED SPEAKER CONFIGURATION SPEAKER PLACEMENT YAMAHA ACTIVE SERVO TECHNOLOGY CONNECTIONS CONNECTIONS WITH OTHER COMPONENTS CONNECTING SPEAKERS ABOUT THE ACCESSORY TERMINALS AC OUTLETS FRONT OUT terminals REMOTE CONTROL (PHONO) connector SETTING OF THE YST SELECTOR ADJUSTMENT BEFORE OPERATION Speaker balance adjustment REMOTE CONTROL TRANSMITTER SPEAKER CONFIGURATION Note NORMAL: WIDE: CENTER REAR OPERATIONS 2 Display PHONES To play a source To record a source to tape Adjusting the BALANCE control Adjusting the BASS and TREBLE controls When you listen with headphones PHONES USING DIGITAL SOUND FIELD PROCESSOR (DSP) On the front panel of this unit On the remote control transmitter Description of Each Sound Field Program Notes on Operation of Sound Field Programs Description of Dolby Pro Logic Surround To play source with the digital sound field processor Adjustment of DELAY TIME Adjustment of the FRONT EFFECT LEVEL Adjustment of the CENTER LEVEL Adjustment of the REAR LEVEL REMOTE CONTROL TRANSMITTER Preset Key Functions For Control of This Unit For Other Component Control REMOTE CONTROL “LEARNING” FUNCTION To Learn a New Function To Clear a Learned Function To Clear All Learned Functions NOTES ABOUT THE REMOTE CONTROL TRANSMITTER Battery installation Remote control transmitter operation range Battery replacement TROUBLESHOOTING SPECIFICATIONS