Adjustment of the FRONT EFFECT LEVEL

If desired, you can adjust the effect sound output level of the front speakers with this control. The output level is preset to be 80. However, you can adjust the level between 1 and 100.

Adjustable. Illuminates.

●If the digital sound field program is in the DOLBY PRO LOGIC, the FRONT EFFECT LEVEL control does not function.

●Once the output level is adjusted, the level value will be common among all the digital sound field programs except the DOLBY PRO LOGIC .

●If any digital sound field program is not used, the FRONT EFFECT LEVEL control does not function.

Adjustment of the CENTER LEVEL

If desired, you can adjust the sound output level of the center speaker with this control even if the output level is already set in “Speaker balance adjustment” on the page 10.

Adjustable. Illuminates.

Adjustment of the REAR LEVEL

●By continuously pressing “+” or “–” of theCENTER LEVEL control, the level value changes continuously. However, the value stops changing momentarily at the point which was once set in the TEST mode.

●If the digital sound field program is in the CONCERT VIDEO, MONO MOVIE, ROCK CONCERT or CONCERT HALL, the CENTER LEVEL control can not function.

●Once the output level is adjusted, the level value will be common among the DOLBY PRO LOGIC and ENHANCED.

●If any digital sound field program is not used, the CENTER LEVEL control does not function.

If desired, you can adjust the sound output level of the rear speakers with this control even if the output level is already set in “Speaker balance adjustment” on the page 10.

●By continuously pressing “+” or “–” of theREAR LEVEL control, the level value changes continuously. However, the value stops changing momentarily at the point which was once set in the TEST mode.

●Once the output level is adjusted, the level value will be common among all the digital sound field programs.

●If any digital sound field program is not used, the REAR LEVEL control does not function.

Adjustable. Illuminates.

Note

The values of the DELAY TIME, the FRONT EFFECT LEVEL, CENTER LEVEL, and REAR LEVEL you set the last time will remain memorized even when the power of this unit is off.

However, in case the power plug cord is kept disconnected for more than two weeks, these values will be invalid.

19