Battery installation

2

1

3

Battery replacement

If you find that the remote control must be used closer to the unit, the batteries are weak. Replace both batteries with new ones.

Note

●Use only AA, R6, UM-3 batteries for replacement.

●Be sure the polarities are correct. (See the illustration inside the battery compartment.)

●Remove the batteries if the remote control will not be used for an extended period of time.

●If batteries leak, dispose of them immediately. Avoid touching the leaked material or letting it come in contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.

English

Remote control operation range

Remote control

sensor

Within approximately 6 m (19.7 feet)

30

 

°

°

30

 

 

Note

●There should be no large obstacles between the remote control and the unit.

●If the remote control sensor is directly illuminated by strong lighting (especially an inverter type of fluorescent lamp etc.), it might prevent the remote control from working. In this case, reposition the unit to avoid direct lighting.

Opening and closing the control door

When using the remote control or when it is not necessary to operate controls inside the control door, close it.

To open the door

To close the door

15