Changing brightness of the display

You can change the brightness of the display (or turn off the illumination) by pressing the DIMMER button.

During playNormal illumination Dim“OFF”

*When the display illumination is off, the AUTO DISPLAY OFF indicator on the front panel lights up.

DIMMER

AUTO

DISPLAY OFF

During stopped or paused

Normal illumination

Dim

Dim

(The AUTO DISPLAY OFF indicator lights up. In this state, if a disc is played, the display illumination will be turned off.)

Adjusting the level of signals output into an amplifier, etc.

You can adjust the level of sound signals output from the LINE OUT terminals on the rear panel into an amplifier, etc. as you prefer by using the OUTPUT LEVEL buttons.

OUTPUT LEVEL

or

OUTPUT LEVEL

–+

(On the front panel)

For optimum sound quality

*When the DIGITAL AUDIO OUT (OPTICAL) terminal is used for the connection, set the level of output signals to max.

*The level of output signals can be checked in the display.
When you listen with headphones

Connect the headphones to the PHONES jack and adjust the volume by using the OUTPUT LEVEL buttons.

*Note that the use of the OUTPUT LEVEL buttons will also vary the level of the signal output to an amplifier, etc.

PHONES

12