TRACK PROGRAMMING FOR RECORDING TO TAPE

English

This convenient feature can be used to program tracks for recording to tape. By only memorizing the tape’s total possible recording time, the unit will automatically program tracks or help you to program tracks so they will fit onto the tape with the least amount of unrecorded space remaining at each end of the tape.

■Automatic tape programming

The unit will automatically program tracks on a disc with the original order of tracks unchanged.

5

4

2

1

OPEN/

SYNCHRO PEAK DIMMER TIME CLOSE

REPEAT

RANDOM

TAPE

CLEAR

PROG

1

2

3

4

5

6

7

8

9

0

+10

FILE EDIT

 

FILE MODE

INDEX

 

 

 

CAPS

 

DISC SKIP/

 

ENTER

 

 

 

 

 

CHARACTER

 

 

DISC MODE

TEXT MODE

 

TEXT SRCH

 

DISC SCAN

 

SKIP/SEARCH

 

OUTPUT LEVEL

 

STOP

PAUSE

PLAY

 

4

7 6, 7

1 Stop the unit.

STOP

2 Select the disc.

DISC SKIP/

CHARACTER

3 The peak level searching function of this unit is useful for adjusting recording level on the tape deck. (Refer to page 24.)

4 Enter the tape’s total possible recording time (tape length).

TAPE

You can select any of four tape lengths by pressing the TAPE button.

TAPE

(off)You can also enter the tape’s total possible recording time manually.Example: For a C-64 tape (32 minutes on each side)

64

➀➁

5 Press the REPEAT button.

REPEAT

The unit automatically programs tracks for side A and side B separately considering the tape’s total time.

*The programmed track numbers and the total number of tracks for side A and B are displayed for a short time.

6 Begin recording on the tape deck and press the PLAY button on this unit’s remote control transmitter at the same time.

7 The unit will pause at the end of side A of the tape. Turn the tape over to side B. Resume recording and, at the same time, press the PLAY or PAUSE button on this unit’s remote control transmitter.

Notes

●It is recommended that you use a tape that is slightly longer in length than the CD you are recording, because the programmed tracks on a CD may not fit properly into the time allowed on each half of the tape.

●CD synchronized recording function can be used if your tape deck is compatible with it. In this case, in step 6 and 7, press the SYNCHRO button and then press the PLAY button on this unit’s remote control transmitter. Recording automatically begins. (For details, refer to page 20.)

Display information during programming

➂

PROG

1 2 3 4 5

➀➁

➀Shows the number of programmed tracks for each side in turn just after the automatic programming is finished, and then it is replaced by the number of the first programmed

track for side A.➁Shows the total time of programmed tracks for each side.
➂ Shows the programmed track numbers for each side.

21