Yamaha CDX-9 CD SYNCHRONIZED RECORDING, 1 Load the disc, Press the STOP button, 2 Load a tape on the tape deck, 4 If necessary, select a desired track

CD SYNCHRONIZED RECORDING

This unit can make a tape deck’s recording synchronized with CD play automatically. With this function, you can record a CD on tape very easily and more precisely.

This recording method needs a YAMAHA tape deck compatible with this function. (Refer to the tape deck’s operation manual to know whether it is compatible or not.)

*This unit and the tape deck must be placed close to each other so that both of them can receive the signals from this unit’s remote control transmitter at the same time.

3	SYNCHRO	DIMMER	TIME	OPEN/	1
				CLOSE
	SPACE PEAK	TAPE	CLEAR	PROG
	1	2	3	INDEX
4	4	5	6	+I0
	7	8	9	0
		REPEAT RANDOM			4
			SEARCH
			SKIP
	STOP	PAUSE	PLAY		5

1 Load the disc.

OPEN/

CLOSE

2 Load a tape on the tape deck.

*The peak level search function of this unit is useful for adjusting recording level on the tape deck. (Refer to page 17.)

3

SYNCHRO

This unit enters into the pause mode, and the tape deck enters into the REC/PAUSE mode.

*In this mode, the time display on this unit flashes on and off.

4 If necessary, select a desired track.

5 SKIP

or

5

PLAY

Both CD play and tape deck recording begin. * CD play begins a little later than recording.

6 If you want to stop recording temporarily and restart recording from a desired track, follow steps 3–5 again.

To cancel this function

Press the STOP button.

Notes

•To finish or stop the recording, make proper operations on the tape deck.

•Programmed sequence of tracks can also be recorded with this function, instead of recording an entire disc. (Refer to page 12–13 for the programming procedure.)

•This function can also be used together with the automatic tape-programming function. (Refer to page 14–16.)

18