CONNECTIONS
Never plug in this unit and other components until all connections are completed.
•Connections should be made to the correct input terminals of the amplifier or other component.
1
LINE OUT | DIGITAL OUT |
1
OPTICAL
•If the placement of this unit causes noise to other equipment, such as a tuner, separate them from each other.
U.S.A. model1
CD
U.S.A. model
2
LINE OUT | DIGITAL OUT |
1
OPTICAL
OPTICAL
DIGITAL IN
To AC outlet
Amplifier with an optical terminal•Be sure that the left (“L”) and right (“R”) LINE OUT terminals are connected to the corresponding (left and right) terminals of the amplifier or other component.
•Connect the “LINE OUT” terminals to the “CD” (or “AUX”) terminals of the amplifier. If the amplifier does not have such terminals, use the “TAPE PB” terminals. For additional details concerning these connections, refer to the operation instructions for the amplifier being used.
•The LINE OUT terminals of this unit are numbered 1. When connecting this unit with a YAMAHA amplifier or receiver whose terminals on the rear panel are numbered as 1, 2, 3, etc., connect the LINE OUT terminals of this unit to the input terminals numbered 1 on the rear of the amplifier or receiver.
•Make the connection from this terminal to the optical input terminal of an amplifier by using a commercially available optical fiber cable.
*Use an optical fiber cable that conforms to EIAJ standards. Other cables might not function correctly.
•Be sure to attach the terminal’s cover when this terminal is not being used, in order to protect the terminal from dust.
•This terminal can also be connected to the optical input terminal of a digital audio tape deck (DAT), MD recorder, etc. to record CD onto tape or MD directly.
4